Designed for top heavy loads that require more floor contact. Because of the differential action that occurs with dual wheels, heavier loads are much easier to swivel.
Click a model number for specifications
300-DW SERIES
Same basic construction as our 300 series. Two, 2 inch wide wheels allow for a total floor contact of 4 inches. A third or middle leg is welded to the base for added strength.

500-DW SERIES
Two wheels are used that measure 2 1/2 inches in tread with, for a total floor contact of 5 inches. See 500 series for engineering data. A middle leg is welded to the top cup for additional support.

900-DW SERIES
The 900-DW series can be manufactured with either a pair of 3 inch tread wheels, (total floor contact 6 inches), or a pair of 4 inch tread wheels, (total floor contact of 8 inches). The same construction applies with this Dual Wheel as our standard 900 series.

Featured is CATALOG NUMBER 900-10TL-CI-DW, swivel with two 10" polyurethane wheels molded to a cast iron center. Timken Bearings are used in the wheels and upper and lower swivel raceways.

• "SL" Swivel Locks.
  
• "WS" Wheel Seals.
  
• Timken Bearings are available with wheels in the 500 and 900 series.
  
• Other Wheels Available.